Dear John,
I had a system with four solar panels Victron Energy, two 75V/15A charge regulators and two BMV-700 monitors. All was perfectly functioning. Some days ago I have added other panels to my system and I have changed the two charge regulators with two 100V/30A, cause the increased power. Now the system is well functioning: panels, regulators (monitored throught the Bluetooth app), except the two BMV-700 monitors, displaying everytime "CONNECTING". I tryed to reset them to the factory defaults, but they do not respond.
It is important to restore them, because the Bluetooth app displays only the power in Watts and in Volts entering, but not more, while the BMV-700 shows many informations more.
What can I do?
Thank you for your kind answer and have my best regards.
Alessandro
alessandrobalducci@tiscali.it

Hi Alessandro,

Thanks for getting in touch. John has retired now - but I have the perfect solution for you. Paste your comment onto our Community page - it was created for just this kind of question, and I know you will be pleased with the support you get from knowledgeable users. The exchange will be helpful to others, too.
Here is the link to our community page: https://community.victronen...

All the best

Thank you, dear Justin!
I have done what suggested from you.
Thank you again and many greetings.
Alessandro

My Victron touchscreen has power but is blank with lines through it. Is it toast?

Hi Jim,
I'm sorry to hear that. On our community page you will find advice which may solve your issue. Or alternatively, have you been in touch with the distributor you bought it from?
You can find our community page here:
https://community.victronen...

https://uploads.disquscdn.c...https://uploads.disquscdn.c...https://uploads.disquscdn.c... Hello! ... I have a BMV-600S I'm installing in my sailboat. Must the positive fused wire connect directly from the shunt to the positive terminal on the battery? I would like to run it through my positive bus, which has a fused connection to the battery.

Hi Edward,

If you post this question on our community page, which has been created to help you with your question, and others who have a similar question, you will find all the help you need. The community page can be found here: https://community.victronen...
Thanks for your question and for being part of the Victron family.

Hello! I have a CTEK 40-106 charger (first one https://www.bestadvisers.co... ) but it doesn't have any normal monitor. Can i somehow connect BMV-700H to it?

Hi AliceGM,

Thanks for your question. If you post it onto our community page you will get all the help you need - and help others.
You will find the community page here:
https://community.victronen...

all the best

Thank you!

My customer has 12 US2000 Pylontech Lithium-ion batteries and he will probably add 4 more soon. He does have a Hub and a Color GX. He is interested in the BMV 712 smart. Will we need more than one unit to support his batteries?

Thanks Justin

I don't know how to

Hi David,
At the top of the Community page there is a 'Sign in' which links to this page: https://community.victronen...
From there you can register a username and password ...and become a member of our community.
Alternatively, if you don't wish to create a user account, you can type your question into the search bar - under the Victron logo on the Community page - to discover interesting conversations which have already taken place concerning the BMV-712 / current measurement.
The reason we can't answer you here, I'm afraid, is that we no longer host technical questions on this page.

Should the BMV 712 monitor the amount of power comming in from the solar panel. At the moment it only shows the output from the battery. Cheers.

Hi David,
We've created a 'Community' page so that questions like yours can be answered by many, to the benefit of all. Can I trouble you to copy and paste your question onto this page: https://community.victronen...
Thank you in advance.

Hi Jamblick,
Can I trouble you to re-post that question on the Community page. You'll get an answer from the whole of the Victron Community - to everyone's benefit. Here's the page:
https://community.victronen...

Why does my CC GX reboot every 2 hours?

Can the BMV-712 Smart be used with the Lynx Shunt? The BMV-702 specifically says that it does in the product data sheet but the 712 Smart doesnt have it listed in it's data sheet.

Hi Justin,
Can I trouble you to re-post that question on the Community page. You'll get an answer from tec-savvy members, and the whole of the Victron Community will benefit. Here's the page: https://community.victronen...

Good day,

is the BMV-700H compatible with the LG Resu 10H battery, which has an extended voltage of 350-450V when used in SolarEdge?

Hello Tomàš - thank you for the question. Can I trouble you to cut and paste it into our Community pages? On that page your question will be useful to all our users. Thanks: https://community.victronen...

Hello I want to use the Cerbo GX with GX touch 50 in a place without internet connexion, there is 50 meters between the screen and the Cerbo GX, is it possible to work with bluetooth or with cable connection. ? Thanks for your answer.

We have a Victron Energy MultiPlus 48/5000/70‐100 (5000VA), 2x MPPT‐Charger Victron Energy BlueSolar MPPT 150/85 with a colour control and 24x Hoppecke sun|power VR L (OPzV solar.power) 1250.
Recently we had to replace two batteries and attached exactly the same type (the "old" batteries were working for about 1,5 years). Of course, the cell voltage in the new one was a bit lower than in the once permanently used because of a long transport time to Africa (2.13 to nominell 2,25 V), Victron recommends in that case a manuell cell balancing, But I cannot find this option in the menu of the colour control. Is there anyone out there who can provide a step by step introduction considering our set-up in Malawi? Thanks and best regards, Bernd

Hi Bernd. Thanks for your question. Can I trouble you to cut and paste your question onto our community page. That's where we answer all technical related questions now, as it gives everybody an opportunity to learn together. The community page can be found here:
https://community.victronen...

That 6000A shunt is a thing of beauty! Now, if I can only figure out some way of using one on my boat....

You just need a big electric motor 😏

Were do you set type of battery in the VRM app ?

Hi Truls, Thanks for your question. Can I trouble you to cut and past your question onto our community page. That's where we answer all technical related questions as it gives everybody an opportunity to learn together. The community page can be found here: https://community.victronen...