We were unable to load Disqus. If you are a moderator please see our troubleshooting guide.

Lisafosterr • 4 years ago

Such a very useful article. Very interesting to read this article.I would like to thank you for the efforts.We provide you online help and support.Call us at Our Asus router help number UK0800-098-8352.

Shaun McDonald • 8 years ago

There's another easier way to get it as documented on http://www.skyuser.co.uk/fo... and http://www.skyuser.co.uk/fo...

I've been using that method with the Apple Time Capsule for a while now, and been getting IPv6 via a tunnel.

Daniel Maclean • 8 years ago

Hi Shaun. Thanks for posting. Your links reference a guide to get it working on a AEBS and not an Asus Black Diamond or ddwrt. Useful for the username stage, not much else I'm afraid.

Shaun McDonald • 8 years ago

Assuming there is a DHCP Client ID field then it would help for the later stage too. If it saves someone going through Wireshark, then I suppose it may help.

Mike • 8 years ago

Ok I wussed out in the end...installed the mildly-modded 'Merlin' firmware which allows you to put the 'xxx@xxx|password' string directly into the router setup page, worked like a charm!

Mike • 8 years ago

Thanks for this Daniel, will be trying in a few days to see if it also works with the NT-N66U, will report back but I'm hoping so!

Daniel Maclean • 8 years ago

Good luck and thanks for reading. Hope it helps

Donald • 8 years ago

I hope the payback was worth it.